FOR SOME TIME NOW, I have discussed with those in the industry the void of market movement in the 56K Bluetooth modem space. So for that reason, it was especially positive to see that there were beginning signs for such products at the recent Blue-tooth Congress 2002. Two were shown at the CSR and Zeevo booths. It is looking like dial-up Bluetooth access points (AP) could be under the Christmas tree this year for the North American market.

The dial-up Bluetooth ALP will address the mass consumer market that does not want to spend $45 to $55 per month on a continual basis for broadband but is willing to spend a reasonable, onetime outlay for the benefits of untethered surfing and printing from their couch without installing a WLAN home network. If advertised and marketed aggressively enough, this could help to increase consumers’ knowledge of the benefits of products that offer Bluetooth cordless functionality then translate that knowledge into revenue. If not advertised and promoted effectively, these products could be slow to take off.

A greater level of consumer awareness of what Bluetooth is and what benefits it offers is the key to unlocking the box of consumer demand. Though knowledge is increasing, the low level of familiarity of Bluetooth by the average consumer is ensuring that mobile phone operators are still not feeling the consumer demand for Bluetooth-enabled handsets. Nokia and Motorola are very common phones in the United States, but Ericsson is not. Sony Ericsson has been the most aggressive Bluetooth-enabled handset manufacturer to date, but there has not been a significant push or driver thus far in the United States.

Since operators subsidize so many phones, it is necessary for them to see some benefit to offering Bluetooth-enabled phones to their subscribers. So they need to reap a return in terms of customer loyalty (for lower churn), obtaining new subscribers, or revenue. Driver safety alone could be a significant trump card in offering subscribers additional benefits. If operators begin to bundle mobile phones and Bluetooth headsets in an aggressive manner, in conjunction with a marketing campaign targeting hands-free use in vehicles for safety, demand could increase quickly.

On the acquisition front, comments were recently flying around regarding the acquisition of Ericsson Microelectronics by Infineon Technologies. The deal is expected to close in about two months. Infineon gains the module business via Ericsson, inroads to supplying semiconductors into wireless infrastructure and a supplementary customer list. Previously, STMicroelectronics began its acquisition of the wireline and wireless groups of Alcatel Microelectronics, while American Microsystems Inc. began its acquisition of Alcatel Micro’s mixed signal group. The acquisitions of Ericsson Microelectronics and Alcatel Microelectronics do not directly affect current market shares of Bluetooth chipsets.

Recent announcements by Texas Instruments for a $4 (BOM) Bluetooth solution via a ROM-based single chip and by Infineon Technologies for sub-$3.75 pricing (both high volumes) have set a new bar. Both use leading 0.13-micron RE CMOS processes, and volume production is planned for Q12003. Philips Semiconductors announced an affiance with Ericsson Technology Licensing for audio/video solutions. For space-constrained applications, Motorola will go into production in Q4 with a stacked chipset die solution in a 7mm-by-7mm-by-1.6mm BGA package. The price will be the same for the company’s separate radio and baseband.

Coexistence solutions were demonstrated by Silicon Wave (Blue802) and Zeevo (alternate wireless media access, or AWMA). Neither is based on the not-yet-finalized adaptive frequency hopping (AFH) scheme. These mechanisms are geared especially toward the PC market since the front-end can get overloaded in co-located situations (such as a laptop), which can still present a problem with AFH. The first coexistence solutions to hit the shelves are expected in the next six to nine months.

In-Stat/MDR estimates Bluetooth chipset shipments will climb from 10.4 million units in 2001 to 48 million this year, growing to 150 million in 2003.

Joyce Putcher is director and principal analyst of InStat/MDR’s Converging Markets & Technologies Group. She can be reached at jputscher@instat.com. InStat/MDR owned by Reed Business Information, the parent company of Electronic News.

Tweet This On TWITTER 

If you enjoyed this post, make sure you subscribe to my RSS feed!

Bluetooth Makes it Easy for All Your Devices and Accessories to Work Together

Bluetooth is one of the latest marketing buzzwords for PDAs and cellular phones, along with PCs and especially laptops. It is a wireless technology designed to let products and accessories built by different manufacturers work together, without requiring special access codes or driver installation. Theoretically, any Bluetooth accessory should work with any Bluetooth-enabled device, and multiple accessories working with the same device shouldn’t interfere with each other.

For example, if you pick up a Bluetooth headset for your current PDA, and then in a year’s time replace it with a new PDA, the headset should work with the new PDA without any difficulties. With some older PDA Bluetooth accessories and devices, this is not always the case, but generally the more recent the design of the accessory or device, the more likely it is to work with other Bluetooth products.

PDAs, Cellular Phones, and Computers

New PDAs today resemble cellular phones as much as classic PDAs like the Palm Pilot. Most of these devices are Bluetooth-enabled, and even have the capability to link with other Bluetooth-enabled PDAs and cellular phones to exchange data. For models that are not Bluetooth-enabled, there are frequently PDA Bluetooth accessories available that will add Bluetooth capabilities to the unit. Bluetooth adapters are also available for PCs and laptops, usually plugging into a USB port, allowing you to easily exchange data between your computer and your PDA.

Just about any type of data can be transferred over a Bluetooth link, from electronic business cards and pictures to word processing documents and PowerPoint presentations. For transferring data from a PDA to a computer, special software is often needed and included with the Bluetooth adapter. However, PDAs running Windows Mobile can communicate natively with computers running Windows XP Service Pack 2 or Windows Vista.

Having a Bluetooth PDA and a Bluetooth adapter for your computer can eliminate the need for a docking station or sync cable, removing one more piece of clutter from your desktop. You can even set the two devices up so they automatically synchronize their data when they’re in range of each other.

Other PDA Bluetooth Accessories

Headphones and headsets are the most common PDA Bluetooth accessories right now. Wireless headphones are great if your PDA has music stored on it, because you don’t have an unsightly wire running from your head to your pocket or purse. Headsets and earpieces allow hands-free operation of your cell phone or smart phone, which is not only convenient but is also quickly becoming a legal requirement world-wide for using your phone in your car.

Printer manufacturers are quickly adding Bluetooth capabilities to their products, turning them into convenient PDA Bluetooth accessories. Previously, to print something stored on your PDA, you had to use the docking station or sync cable to download the information to your computer, then print it from the computer. With a Bluetooth-enabled printer, you can send your data directly to the printer without the intervening steps. If your computer is also Bluetooth-enabled, it can send data to the printer as well, eliminating the need to hook up the printer to the computer or network.

There are many other PDA Bluetooth accessories available for your PDA, and with Bluetooth it doesn’t matter who manufactures either the device or the accessory. A Motorola headset will work with an iPhone, and a Palm Tungsten can print spreadsheets on a HP LaserJet. Manufacturers are constantly coming up with new PDA Bluetooth accessories to meet the demands of consumers. Bluetooth technology is making it easier for everyone to communicate.

Tweet This On TWITTER 

If you enjoyed this post, make sure you subscribe to my RSS feed!

Network Marketing Professionals can use the Ad Pods Bluetooth Marketing System to advertise your business locally. The advertising staff have prior experience in the Business Field. They also have a pulse on the Network Marketing Field. The Ad Pods Bluetooth Marketing System knows all about building in competitive markets.

Advert marketing is so much more than a lot of marketers would expect. They are more than just flyers. The pods will send pictures, videos, animation, music and virtual business cards, which stores your contact information right into the recipients phone. That is powerful!

If you use the software and pod together it’s much easier to control. As an example, you can program to send adverts on a schedule. If you have a promotion you wish to send out at ten in the morning and another one sent out at three o’clock in the afternoon, this can be programmed into the unit.

The pod can also run a blocking list. If you are using the pod at a specific location in town, and do not want to be hitting the location you are in over and over again. The software will not let this happen because it remembers not to send this same message again unless you program it to do this. The blocking list will also not send a message to someone who has declined to receive your message.

An Ad Pods is a stationary unit, but also becomes mobile with it’s optional rechargeable battery pack. Try sending off thousands of advertisements while off skiing or fishing. Wherever you go, wherever you are, you can be marketing your services and products using this product.

Using Ad Pods puts you in a very unique position when prospects are phoning you to find out more about your offer. Usually, you have to be cold calling them.

Because this method of Bluetooth advertising is Opt-in advertising, it is permission based. The prospects getting our advertisements aren’t being abused via email.

This company’s vision is to be that company that sets the standards for the future legislation that will enforce and regulate this type of technology. At the present, a vast majority of the marketplace is not yet aware of the full scope of this new technology, or where it will go.

The Ads Pods Bluetooth Marketing System is on the verge of a major breakthrough. They have the right products and a clear vision of the future of this technology that is growing in leaps and bounds.

This company is positioned with one of the easiest, simplest, most cost effective products in the marketplace. They want top class independent distributors to affiliate market their system with them and help them make the Bluetooth market regulated.

It is a special moment in their evolution. This company knows they will grow because of their system and also because of their commitment to the customers. For more insight into their lucrative payment plans and more information about the affiliate program they offer, you can get all of the details at the company’s website.

Tweet This On TWITTER 

If you enjoyed this post, make sure you subscribe to my RSS feed!

Marketers now have another method available to advertise with. Ad Pods Bluetooth Marketing System will get the message out for you in your local area. This company’s management staff have been experienced in all the various methods of network marketing through the years. They have hands-on experience and know first hand how the network marketing industry turns. More important the team at Ad Pods Bluetooth Marketing System understand the challenges of building businesses in this very competitive market.

Advert marketing is so much more than a lot of marketers would expect. They are more than just flyers. The pods will send pictures, videos, animation, music and virtual business cards, which stores your contact information right into the recipients phone. That is powerful!

Using the software with the pod is intuitive and easy to command. As an example, you can program to send adverts on a schedule. If you have a promotion you wish to send out at ten in the morning and another one sent out at three o’clock in the afternoon, this can be programmed into the unit.

The pod can also run a blocking list. If you are using the pod at a specific location in town, and do not want to be hitting the location you are in over and over again. The software will not let this happen because it remembers not to send this same message again unless you program it to do this. The blocking list will also not send a message to someone who has declined to receive your message.

An Ad Pods is a stationary unit, but also becomes mobile with it’s optional rechargeable battery pack. Imagine having the ability to send off thousands of adverts while playing a game of golf with your friends. Wherever you go, wherever you are, you can be marketing your services and products using this product.

Using Ad Pods puts you in a very unique position when prospects are phoning you to find out more about your offer. Usually, you have to be cold calling them.

Because this method of Bluetooth advertising is Opt-in advertising, it is permission based. This means that the customers receiving your adverts are not being spammed by you.

This company’s vision is to be that company that sets the standards for the future legislation that will enforce and regulate this type of technology. At the present, a vast majority of the marketplace is not yet aware of the full scope of this new technology, or where it will go.

Ad Pods Bluetooth Marketing System is poised in the edge of greatness. They have the right products and a clear vision of the future of this technology that is growing in leaps and bounds.

This company is positioned with one of the easiest, simplest, most cost effective products in the marketplace. They want top class independent distributors to affiliate market their system with them and help them make the Bluetooth market regulated.

It is a special moment in their evolution. This company knows they will grow because of their system and also because of their commitment to the customers.
For more insight into their lucrative payment plans and more information about the affiliate program they offer, you can get all of the details at the company’s website.

Tweet This On TWITTER 

If you enjoyed this post, make sure you subscribe to my RSS feed!

Below, are 10 benefits and reasons to use Bluetooth technology?

1. Wireless
As you probably already know, there are many benefits and advantages to using wireless devices. Along with improving safety as a result of eliminating wires you don’t need, wireless also offers you plenty of other advantages. When travelling with your laptop or other wireless devices, you’ll no longer have to worry about bringing connection cables.

2. Bluetooth is actually inexpensive
The technology of Bluetooth is cheap for companies to implement, which results in lower costs for the company. These savings are then passed from the company on to you.

3. Bluetooth is automatic
Bluetooth doesn’t have you set up a connection or push any buttons. When two or more devices enter a range of up to 30 feet of each other, they will automatically begin to communicate without you having to do anything.

4. Standardized protocol
Bluetooth is standardized wireless, meaning that a high level of compatibility among devices is guaranteed. Bluetooth will connect devices to each other, even if they aren’t the same model.

5. Low interference
Bluetooth devices almost always avoid interference from other wireless devices. Bluetooth uses a technique known as frequency hopping, and also low power wireless signals.

6. Low energy consumption
As a result of Bluetooth using low power signals, the technology requires very little energy and will use less battery or electrical power as a result. This is an excellent benefit for mobile devices, as Bluetooth won’t drain the battery.

7. Sharing voice and data
The standard for Bluetooth will allow compatible devices to share data and voice communications. This is great for mobile phones and headsets, as Bluetooth simplifies driving and talking on your cell phone.

8. Instant PAN (Personal Area Network)
You can connect up to seven Bluetooth devices to each other within a range of up to 30 feet, forming a piconet or PAN. For a single room, you can also set up multiple piconets.

9. Upgradeable
Upgradeable is the standard for Bluetooth. There are newer versions of Bluetooth in the works, which offer many new advantages and backward compatible with older versions.

10. The technology stays
Bluetooth technology is a world wide, universal wireless standard. With it being as popular as it is, you can count on it being around for years to come. As more and more devices start to use Bluetooth technology, more manufacturers will be eager to make their products compatible. A chain reaction will occur, making Bluetooth the standard for cutting edge wireless.
Uchenna Ani-Okoye

Uchenna Ani-Okoye is an internet marketing advisor and co founder of Free Affiliate Programs For more information and resource links on Bluetooth visit: Buy Bluetooth GPS

Tweet This On TWITTER 

If you enjoyed this post, make sure you subscribe to my RSS feed!

Most everyone has heard about Bluetooth wireless networking. It is a popular technology that is found in just about every corner of the globe and in numerous types of electronic equipment. The specifications for the powerful Bluetooth technology was invented during the 1990s and started to be introduced into the marketplace near the end of the century.

Ericsson (now Sony Ericsson) developed Bluetooth in an attempt to standardize wireless technology networking so that it would be cheaper and easier to integrate several devices. The ideal situation for the consumer would be for electronic companies to produce a single, shared standard, allowing customers to collaborate their wireless devices regardless of who made the products.

One of the factors that has helped Bluetooth become so popular, and the standard in short-range wireless communication, was the decision that Ericsson made to keep the Bluetooth specifications royalty free. Companies interested in implementing the technology were invited to join a consortium of developers and were then allowed to use the technology free-of-charge in any of their products.

This standard makes technology extremely affordable for manufacturers to continue creating groundbreaking equipment that incorporates the desired technology. Because of this, these devices have also become cheaper to the end user, and it has allowed Bluetooth networking to be the mobile wireless technology standard.

These electronic gadgets and tools can seamlessly connect and communicate with each other, transferring both voice and data simultaneously, thanks to the marvels of wireless networking technology. Bluetooth technology is designed for three types of wireless defined communication ranges.

Of these, the Class 2 wireless devices are the most powerful, having a range of up to 300 feet. Effective ranges of 50-100 feet are provided by lesser powered class 2 devices. Class 3 devices use less power, and their range is more limited to only about 15 to 30 feet.

Many people do not realize that Bluetooth technology was only designed for short-range connectivity and communications. When it was designed, the short-range limitation was actually an intentional feature.

This short-range design limits the possibility of interference from nearby electrical devices. This form of security prevents others from connecting with your devices, and protects the device along with your data.

Using less power, a necessary requirement for short distance transmission, is another benefit of limiting the range of networking devices. Less power required means an increased battery life, a key component required by most users, as a good many of their Bluetooth devices are powered by batteries.

There are a multitude of electronic devices that use Bluetooth wireless networking standards, such as: many wireless PDAs, wireless phones and wireless headsets that work in conjunction with each other and the Bluetooth wireless printer and wireless stereo headset, just to mention a few. Bluetooth technology is increasingly in demand in a wider range of products and manufacturers are working hard to satisfy this demand with more compatible electronic devices.

As a Sacramento computer service expert Graham Pendegrast knows how useful Bluetooth technology can be for a company’s networking needs. For more complicated networking jobs Graham recommends Integral Networks, a Sacramento IT consulting company.

Article Source: http://EzineArticles.com/?expert=Graham_Pendegrast

Tweet This On TWITTER 

If you enjoyed this post, make sure you subscribe to my RSS feed!

If you’re one of those who drives a BMW 3 or 5 series or X5 built between 2002 and 2006 and are seeking a way to bring your car’s sound system up to date, consider a BMW Bluetooth retrofit for your automobile’s sound system.

What Is Bluetooth?

You’ve probably heard of Bluetooth, but may not know exactly what it is, how it works or why you should equip your older vehicle with a BMW Bluetooth retrofit.

Bluetooth technology (named after a rather despotic Scandinavian king of the late Viking Age) is really a type of electronic protocol – an industry standard that allows different electronic devices such as personal computers, printers, cel phones, and a wide range of digital devices to connect to each other and exchange information without the need for cumbersome cables and wires. It operates in a manner that is similar to a short-range radio frequency.

Uses and Capabilities

Bluetooth is highly effective for small devices that are in close proximity (up to 100 meters apart, depending on whether the device is Class I, II or III). Because of this, a BMW Bluetooth retrofit is ideal for the small, enclosed environment of an automobile interior.

If you’re like many busy people, you have a mobile phone with you and activated most of the time – including drive time. However, use of a cel phone while driving is unsafe, and actually illegal in many places. By installing a BMW Bluetooth retrofit in your classic vehicle, you’ll enjoy “hands-free” communication when receiving an important call while behind the wheel. You won’t even have to remove your cel phone from your pocket!

Taking It To The Next Level

A BMW Bluetooth retrofit allows you to integrate your cel phone into your vehicle quickly and easily. One of the most useful aspects of this is the ability to activate your cel phone and dial a number using voice commands. If your phone is equipped with this capability, you can simply speak the number you wish to dial, and your BMW Bluetooth retrofit allows it to dial it for you – automatically!

In addition, newer phones and navigation systems can display information right on your vehicle’s own digital displays (i.e., the instrument cluster).

No More Missed Calls

You probably enjoy playing your radio or CDs while commuting. You’ll be glad to know that the BMW Bluetooth retrofit automatically mutes the music or other audio programming when receiving or making a call.

Get Started Now

The BMW Bluetooth retrofit is designed for simple installation using the original manufacturer wiring. It really is as simple as “plug and play,” and afterwards, you’ll be able to control all of your cell phone’s functions using nothing more than the steering wheel controls, radio knobs and of course, your own voice. It’s easy and economical to update your vehicle with a BMW Bluetooth retrofit.

Wayne Hemrick installs audio systems for BMW’s. He specializes in the BMW Bluetooth retrofit, and provides advice on BMW Bluetooth installation. If you are considering a BMW Bluetooth retrofit, Wayne’s advice will be helpful in understanding how the BMW Bluetooth kits work.

Article Source: http://EzineArticles.com/?expert=Wayne_Hemrick

Tweet This On TWITTER 

If you enjoyed this post, make sure you subscribe to my RSS feed!

Bluetooth wireless networking is a technology that is sweeping the globe and being integrated into a wide variety of electronic devices these days. The underlying Bluetooth technology was developed in the mid 1990s and began to be seen in more and more pieces of equipment toward the end of the decade.

The developers of Bluetooth, Ericsson (which has since become Sony Ericsson), endeavored to create a single standard for wireless technology networking that could be easily and inexpensively integrated into various electronic devices for ease of connectivity. Having a single standard shared by all electronic developers, designers and manufacturers was the ideal because it would allow the end user to enjoy wireless networking of their devices, regardless of who manufactured the electronic item.

Ericsson made a strategically brilliant decision in the early days of Bluetooth wireless networking technology. They decided to make the Bluetooth specifications available free of charge to companies that were interested in developing and implanting the technology into their products. This created a spirit of cooperation amongst the developers.

This has helped to make this technology very affordable for companies to continue to develop innovative products using the latest technology platform. This has also made its networking to quickly become the standard in mobile wireless technology, and has made the devices more affordable for the end user as well.

With wireless networking technology functioning in different devices, these electronic tools and gadgets are able to seamlessly connect with each other and communicate and transfer both voice and data simultaneously. The Bluetooth wireless technology provides for three different kinds of defined communication ranges.

The Class 1 devices are the most powerful and have a range of up to 300 feet. Class 2 devices are of lesser power and provide an effective range of 50 to 100 feet. The Class 3 devices require even less power and their range is limited to approximately 15 to 30 feet.

One thing many people fail to recognize is that this latest technology was never designed to provide for anything other than short-range connectivity and communications. And, this short-range limitation is actually a benefit that was intentionally designed into the specifications.

The first benefit of the short-range design of its networking is that this factor limits the possibility of interference from devices belonging to others who are in close proximity. This keeps others from connecting with your devices and is a form of basic security intended to protect your devices and your data.

Another benefit of limiting the range of networking devices is that less power is required for the transmission over shorter distances. This in turn means that you can enjoy longer battery life, and since the majority of its enabled products are powered by battery, this is an important feature for most users.

There are a multitude of electronic devices that use Bluetooth wireless networking standards, such as: the Bluetooth wireless PDA, the Bluetooth wireless phone and the Bluetooth wireless headset than works in conjunction with them, the Bluetooth wireless printer, the Bluetooth wireless stereo headset, just to mention a few. Bluetooth technology is increasingly in demand in a wider range of products and manufacturers are working hard to satisfy this demand with more Bluetooth enabled electronic devices.

Educate yourself further about bluetooth wireless networking from Mike Selvon articles portal. Your feedback is valued and appreciated at our bluetooth wireless technology blog where a free audio gift awaits you.

Article Source: http://EzineArticles.com/?expert=Mike_Selvon

Tweet This On TWITTER 

If you enjoyed this post, make sure you subscribe to my RSS feed!

To have a good smartphone that would fit your needs, you should give your interest to some important features that should be coming with any smartphone. I will tell you know what are exactly the most important features to own a perfect smartphone.

The digital mp3 player. This function would be very cool with your cell phone. Imagine what is your degree of enjoyment with your favorite music all the time. You can download all your favorite songs to your mobile phone to listen to it wherever you go. Buy owning one of those smart phones which provides a built-in digital mpo3 player, you don’t have to carry any additional electronic devices to can listen to mp3 music.

The built-in digital camera. It must be in a very high quality, you may choose the smartphone that provides a mega pixel VGA camera to can record high quality videos and to can capture high quality images. Then you can send them to any other bluetooth-enabled devices.

The above paragraph will take me to write about the third important feature, it is the bluetooth headset.

The bluetooth headset. This is one of the most important technology that should be in your cell phone, the bluetooth headset enables the user to send and receive data wirelessly. Of course you can exchange files between the bluetooth-enabled cell phone and any other bluetooth-enabled electronic devices such as laptop, personal computer and any other bluetooth-enabled cell phones.

The GBS navigation system is also would be a very cool feature that allows you to track your ways. The best and the coolest thing with the smartphone is the ability of accessing the internet. Actually, the smart phone is a combination between the ordinary high technology cell phone and the mobile web browsing device that enables users like you to access Email address and websites.

It should also provide all message functions like SMS, EMS, MMS. It also can feature the chatting functions such as MSN messenger.

I think the mobile phone like that would be a perfect handed gadget that gives you all communication functions and all enjoyment options.

Find discount Palm Smartphones at Cheap Palm Smartphone

Article Source: http://EzineArticles.com/?expert=Elhusseiny_Shahin

Tweet This On TWITTER 

If you enjoyed this post, make sure you subscribe to my RSS feed!

The Samsung SCH-a990 Mobile Phone represents the pinnacle of cell phone technology today. With support for Verizon Wireless’ exciting V Cast service, music player capabilities, and a powerful 3.2-megapixel camera with autofocus and video-recording capabilities, this phone is not fooling around. The phone also features TV output, Bluetooth-based printing, a swivel screen for total photographic control; The Samsung SCH-A990 boasts a 3.2-megapixel camera with autofocus and video-recording capabilities. The EV-DO handset also supports Verizon’s 3G services, has integrated Bluetooth, a swivel screen, a speakerphone, and good call quality. It comes with an autofocus feature, video-recording capabilities, and a cool swivel screen. This high-end mobile also has support for Verizon’s 3G services, and excellent call quality. But it’s not without problems.

Camera

Despite a couple of design glitches and restrictions, the Samsung SCH-A990 Mobile Phone is a high-end multimedia phone that boasts a sharp, 3.2-megapixel camera and good call quality, it’s 3.2-megapixel camera, trumping the recently lauded Nokia N80. It has an auto focus feature, zoom, and plenty of imaging options. You can choose from five picture modes, three quality settings, and five resolutions (2,048×1,536, 1,600×1,200, 1,280×960, 1,024×768, and 800×600). You can adjust the brightness, white balance, color effects, and ISO settings. There’s also a multi shot mode and a self-timer, and you can change or turn off the shutter sound. Many of these options are also available to you in camcorder mode, although you get a choice of only two resolutions (320×240 and 176×144). You can capture up to an hour’s worth of video with sound.

Performance

Verizon’s network, and call quality was great. Speakerphone quality was just as good, and we had no problems pairing the handset with the Logitech Mobile Traveller Bluetooth headset. An integrated speakerphone that makes Samsung SCH A990 Mobile Phone easy to converse without touching the handset is a big plus point for car users. The a990 is Bluetooth enabled wireless headsets can be configured with the phone for total hands free operation.

You can share your photos, videos and slide shows with an entire room full of people by connecting your a990 directly to any TV or home theater system. To print, just connect to any Picture Bridge-compatible printer, and in seconds you’ll have beautiful, full-color photos. You can also wirelessly send your photos to any Bluetooth-enabled printer. On top of all that, you can use the a990’s camera as a business card scanner.

Monty Alexander has a wealth of experience in writing articles on all mobile handsets i.e. Motorola mobiles, samsung mobile phone, nokia mobiles, samsung mobiles etc.

Article Source: http://EzineArticles.com/?expert=Monty_Alexander

Tweet This On TWITTER 

If you enjoyed this post, make sure you subscribe to my RSS feed!